Dll Version : 20201
Config Load Success.
Opened Port (LPT) : 1
Set Data Lines: 3
Set Control Lines: 4
Ready .
Chip = PIC16F84A
Speed = 0
PIC_JigNum = 6
Trying signature read ...
- using single protocol .
Signature = 10 E0
Chip = PIC16F676
- lines active, ready .
Mode Read : All .
Read Code ...
Start at 0x00000000
- isp restarted .
Code Read 2048 OK
Read UserId ...
Start at 0x00004000
UserId 8 OK
Error : All Data = FF !
- skipped dummy.
Read Config ...
Start at 0x0000400E
Config 2 OK
Read Eeprom ...
Start at 0x00000000
Eeprom 256 OK
"temp_backup.bin"
 - Done.
Bin2hex Started ...
HEX-File Create Complete .
"Auto" = Combined Mode .
- Verify started ...
File checking ...
- Main Code 2048
- Ext Code 0
- UserID 0
- Config 2
- Eeprom 256
Mode Verify : All .
Verify Code ...
Start at 0x00000000
- isp restarted .
Code Verify 2048 OK
Verify Config ...
Start at 0x0000400E
Config 2 OK
Verify Eeprom ...
Start at 0x00000000
Eeprom 256 OK
- verify done .
Rcv Data = 03A4
- isp restarted .
Rcv Data = 3480
- isp restarted .
Rcv Data = 3480
- isp restarted .
Rcv Data = 3480
Config saved .