BSP Revision: 13339 load ddr.init AC ON...... load ddr script ddrcfg_sector: 524288 DDRF:19M_16b_1450M_2G_20160121.txt LVDS_FMT_8BITS_VESA STBC version : 258232 Power on AC! debug [stbcdat]Find STBCDAT in block 1 [stbcdat]Valid data offset: 0x7f49800 Power on AC! Power on mode: DEP ON STATUS! Power on mode: last mode is On! [stbcdat]Find STBCDAT in block 1 [stbcdat]Valid data offset: 0x7f49800 kernel_index:1 Boot from kernel 1 Read reset image from NAND flash Buf:0x7e27fc0 Offset:0x4060000 Size:2883584 ih_comp type : 1 last jump [ 0.000000] NVT SVN info : Last Changed Rev: 13821 [ 0.320861] Set partition information by project /etc/rc.local start ROOTFS Revision: 267116 Mount APDAT /dev/mtd12 is UBIFS UBI device number 1, total 50 LEBs (6348800 bytes, 6.1 MiB), available 4 LEBs (507904 bytes, 496.0 KiB), LEB size 126976 bytes (124.0 KiB) mount APEXE mount mtd16 /dev/mtd16 is UBIFS UBI device number 2, total 310 LEBs (39362560 bytes, 37.5 MiB), available 8 LEBs (1015808 bytes, 992.0 KiB), LEB size 126976 bytes (124.0 KiB) The squashfs UBIID=2 ubiattach pridat /dev/mtd18 is UBIFS Auto run apexe [BOOT] run.sh start run.sh mount tmpfs finish [Boot] show boot logo run.sh call install_fpga.sh finish run.sh ulimit -c unlimited finish run msg server insmod kernel driver begin Ufastlogo start [Jun 29 2016-10:53:46] run.sh export finish [BOOT] run.sh call com.nvt.idtv [ 1.065112] FUNC nvt_mem_create_node_from_dt name secure_os addr 0 size 0 mode 1 [ 1.083386] FUNC nvt_mem_create_node_from_dt name dtv_aud addr 0 size 0 mode 1 [ 1.090831] FUNC nvt_mem_create_node_from_dt name mm_aud addr 0 size 0 mode 1 [ 1.098189] FUNC nvt_mem_create_node_from_dt name aud addr 0 size 380000 mode 1 [ 1.105908] FUNC nvt_mem_create_node_from_dt name dsp addr 380000 size 4c0000 mode 1 [ 1.113827] FUNC nvt_mem_create_node_from_dt name encrypt addr 840000 size 40000 mode 1 [ 1.122032] FUNC nvt_mem_create_node_from_dt name demux addr 880000 size 1280000 mode 1 [ 1.130203] FUNC nvt_mem_create_node_from_dt name atv addr 1b00000 size e00000 mode 1 [ 1.138218] FUNC nvt_mem_create_node_from_dt name share_mem addr 2900000 size c00000 mode 1 [ 1.146712] FUNC nvt_mem_create_node_from_dt name dtv addr 3500000 size 1600000 mode 0 [ 1.154810] FUNC nvt_mem_create_node_from_dt name va addr 4b00000 size 100000 mode 0 [ 1.162704] FUNC nvt_mem_create_node_from_dt name hw_rotate addr 4c00000 size 0 mode 0 [ 1.170802] FUNC nvt_mem_create_node_from_dt name encoder_s addr 4c00000 size 0 mode 0 [ 1.178864] FUNC nvt_mem_create_node_from_dt name data_sync addr 4c00000 size 0 mode 1 [ 1.186958] FUNC nvt_mem_create_node_from_dt name isdb_buffer addr 4c00000 size 700000 mode 0 [ 1.195630] FUNC nvt_mem_create_node_from_dt name jpeg_vid_enc addr 5300000 size 0 mode 0 [ 1.203990] FUNC nvt_mem_create_node_from_dt name encoder_n addr 5300000 size 0 mode 0 [ 1.212058] FUNC nvt_mem_create_node_from_dt name vbi addr 5300000 size 40000 mode 0 [ 1.219977] FUNC nvt_mem_create_node_from_dt name muxer addr 5340000 size 0 mode 0 [ 1.227695] FUNC nvt_mem_create_node_from_dt name sbm addr 880000 size 1280000 mode 0 [ 1.235701] FUNC nvt_mem_create_node_from_dt name osd addr 5340000 size 2ac0000 mode 0 [ 1.243762] LINE 201,FUNC nvt_mem_create_node create memory node from dts [chip/evb668/nt72668_fb.c][Backlight_Check:799][-TRACE-][FEI_DEBUG]BK_FLAG(31020000),ipc_ack(311a0000) [chip/evb668/nt72668_fb.c][nt72658_Backlight_ONOFF:853][-TRACE-][FEI_DEBUG]Light ON [main.c][main:189][-TRACE-]-- IPC OK! -- [BOOT] start main() on app_main_fastTune. Time = 2453 # build: Aug 10 2016, 20:18:40 start PLAT_SYS_Init() on Pre_init PLAT_SYS_ClrWakeUpTimeAll, 1656 PLAT_SYS_ClrWakeUpTimeByNum, 1625 PLAT_SYS_SetWakeUpTimeByNum, 1690 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D:H:M:S = 0: 0: 0: 0: 0: 0 [PLAT-SYS] u8DayOfWeek= 0, u16DayOfYear= 0, b8DaylightSavingTime= 0 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D (base-year:1900)= -1900/-1/ 0 [PLAT-SYS]timer Enable or Disable 0 [PLAT-SYS] ======================== [PLAT-SYS] STBC_Day =49710, total sec(base1970)=1193046 PLAT_SYS_ClrWakeUpTimeByNum, 1625 [ 2.535671] ntktspu driver(major 127) installed. PLAT_SYS_SetWakeUpTimeByNum, 1690 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D:H:M:S = 0: 0: 0: 0: 0: 0 [PLAT-SYS] u8DayOfWeek= 0,[ 2.555080] [ 2.555080] AUDIO-0.5.484.001 [20160606] u16DayOfYear= 0, b8DaylightSavingTime= 0 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D (base-year:1900)= -1900/-1/ 0 [PLAT-SYS]timer Enable or Disable 0 [PLAT-SYS] ======================== [PLAT-SYS] STBC_Day =49710, total sec(base1970)=1193046 PLAT_SYS_ClrWakeUpTimeByNum, 1625 PLAT_SYS_SetWakeUpTimeByNum, 1690 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D:H:M:S = 0: 0: 0: 0: 0: 0 [PLAT-SYS] u8DayOfWeek= 0, u16DayOfYear= 0, b8DaylightSavingTime= 0 [PLAT-SYS] ======================== [PLAT-SYS] Y:M:D (base-year:1900)= -1900/-1/ 0 [PLAT-SYS]timer Enable or Disable 0 [PLAT-SYS] ======================== [PLAT-SYS] STBC_Day =49710, total sec(base1970)=1193046 [PLAT_SYS] partition file : ======[PLAT_SYS]PartitionTable Show[/mtd_apexe/board/data/partition.txt]======== Partition_name Part[ 2.642639] kdvif: alloc_chrdev_region : retval = 0 ition_id Dev_name partition_offset xboot 0 /dev/mtd0 0 ddrcfg 1 /dev/mtd1 0 ddrbud 2 [ 2.663417] kdvif: retval = 0 /dev/mtd2 0 xbootdat 3 [ 2.672647] kdvif: class_create start /dev/mtd3 0 misc 4 /dev/mtd4 0 stbc 5 /dev/mtd5 0 secos 6 /dev/mtd6 0 uboot 7 /dev/mtd7 0 fdt0 8 /dev/mtd8 0 ker0 9 /dev/mtd9 0 fs0 10 /dev/mtd10 0 ap0 11 /dev/mtd11 0 apdat0 12 /dev/mtd12 0 fdt1 13 /dev/mtd13 0 ker1 14 /dev/mtd14 0 fs1 15 /dev/mtd15 0 ap1 16 /dev/mtd16 0 apdat1 17 /dev/mtd17 0 pridat0 18 /dev/mtd18 0 stbcdat 19 /dev/mtd19 0 ================================================================================ APP_MGR_SWUpdate_BackupDBCheck start time=2511!!! APP_MGR_SWUpdate_BackupDBCheck end time=2536!!! start APP_MGR_TIMER_Init() on Pre_init. finish APP_MGR_TIMER_Init() on Pre_init. finish APP_MGR_Channel_Init() on Pre_init. start APP_MGR_Fact_Init() on Pre_init. NVM seed not found !! ----- MGR_AUDIO DB initial load ----- =====>>>>> [_MGR_Fact_NVM_Load_DB][5888] ----- MGR_AUDIO DB initial load ----- =====>>>>> [_MGR_Fact_CheckPanelFile]-[12129] u32PanelFileSize == 2942 [Dev] start DEV_Uart_init() on Pre_init Time = 2599 DEV_Uart_init, 2672 DEV_Uart_init(2762) uart init ok! DFB_RECEIVE_KEY DEV_Uart_init, 2769 [BootUp] Sys DB is opened (OffSrcIdx: 4) finish APP_MGR_SYS_Init on Pre_init. [Boot] APP_MGR_SYS_Init on enOffSourceIdx:4 s32OffTVChannelIdx:93 [ 2.838677] [MSG_DRV_CRYPTO]Novatek CRYPTO Driver registered enOffTVSourceIdx:14 [Boot] s32G_lastChannelIdx 93 s32G_lastTVChannelIdx 93 [Boot] Freq 43250000 [Boot] ColorSys 5 [Boot] AudSys 3 [lwhite]======>DEV_COMMON_SetLocalSet enLocalset=2 PLAT_OS_Init .............................. OKl [PLAT-SYS]======================== [PLAT-SYS] Y:M:D:H:M:S = 1970: 1: 1: 0: 0: 3 [PLAT-SYS] u8DayOfWeek= 4 u16DayOfYear= 1 b8DaylightSavingTime= 0 [PLAT-SYS]======================== [PLAT-OS] update RTC Clock time as 1970-01-01 00:00:03, OldTotalSec=2, NewTotalSec=3, diff:+1 start APP_MGR_SysSetup_Init on Fasttune_check. enLanguage= 0x737572 APP_MGR_AppLanguageToISO639Code rus =72,75,73 enLanguage= 0x676e65 APP_MGR_AppLanguageToISO639Code eng =65,6e,67 enLanguage= 0x737572 APP_MGR_AppLanguageToISO639Code rus =72,75,73 enLanguage= 0x676e65 APP_MGR_AppLanguag[ 2.920785] [ 2.920785] KER_LOG_DrvInit is called!! eToISO639Code eng =65,6e,67 enLanguage= 0x737572 APP_MGR_AppLanguageToISO639Code rus =72,75,73 #P-AOUT# (PLAT_AOU[ 2.936838] KER_MEM_DrvInit T_SetSpeakerDela[ 2.940189] KER_MEM_DrvInit y) - speaker not found ( SPK-3 ) key=0x52003B *** unknow *** mdc_send_event() Received User Event: 0x52003B, 0, 0 APP_MGR_SysSetup_GetClockMo[ 2.957050] open ok deIndex() =0 b8_NormalBoot on: 0 PLAT_SYS_GetPowerOnEvent: 2 Channel lock Status: 0 Func: Fasttune_check. [BOOT] end Pre_init() on app_main_fastTune. Time = 2864 [ 3.113415] : no devicenode given [ 3.139858] atv_mau1 No such memory node [CommonFastLogoBase.c][FLB_Destruct:299][-TRACE-]-- [FEI_DEBUG]Finish! -- Ufastlogo end [ 3.530342] dtv_sub No such memory node [ 3.576988] sw_decoder No such memory node [ 3.661179] sdp-mc-audio.5 sdp-mc-audio.5: ASoC: Failed to add dec0 dolby compressed mode: -16 [ 3.688452] sdp-mc-audio.5 sdp-mc-audio.5: ASoC: Failed to add dec1 dolby compressed mode: -16 insmod kernel driver finish ntkdriver ready [Boot] wait for ntkdriver ready Time = 1005 TD_DBG_Init start TD_DBG_Init success ------------------------------------------------------ 0. Exit 1. APPLICATION + 2. MIDWARE (Invalid) 3. PLATFORM + 4. DEVICE + 5. DRIVER + 6. MISC + ------------------------------------------ [?] help -- Select: [NDAL_Common_Init]FUNCTION_START g_bSdcommonInit = 0 ############################################## ############################################## ################ NDAL_Common_Init:259 ############### ############################################## ############################################## SdShellCmd_SockFd_Get@137 iSockFd=20 Can not open /dev/nvt/ntkvplt [sd_shell_video_drm_share_mem_create] : Create DRM share memory - Start [sd_shell_video_drm_share_mem_create] : Create new iShmid [sd_shell_video_drm_share_mem_create] : Create DRM share memory - End [sd_shell_video_drm_open,363] : Step 1 : Open DRM Device : drm_card_id = 26 open drm pass [sd_shell_video_drm_create_fb,379] : Step 2 : Create Frame Buffer - Start g_drm_device_id[0] = 26 [sd_shell_video_drm_create_fb,406] : fb_id = 41 [sd_shell_video_drm_create_fb,415] : Step 2 : Create Frame Buffer - End [sd_shell_video_drm_kms_init,427] : Step 3 : Init Kernel Mode Setting - Start g_drm_device_id[0] = 26 [sd_shell_video_drm_kms_init,473] : crtc_id = 3 drmModeGetEncoder= PASS [sd_shell_video_drm_kms_init,506] : crtc_id = 3 plane_id[7] = 18 plane_id[6] = 32 plane_id[5] = 33 plane_id[2] = 34 plane_id[1] = 37 plane_id[0] = 38 plane_id[3] = 39 plane_id[4] = 40 [sd_shell_video_drm_kms_init,587] : Step 3 : Init Kernel Mode Setting - End Set DVIF source!!! [NDAL_Common_GpioInit]FUNCTION_START [NDAL_Common_GpioInit]FUNCTION_FINISH dev name = /dev/i2c-0 dev name = /dev/i2c-1 dev name = /dev/i2c-2 dev name = /dev/i2c-3 dev name = /dev/i2c-4 dev name = /dev/i2c-5 dev name = /dev/i2c-6 /dev/i2c-6 open failed, gFileDesc[6] = -1 dev name = /dev/i2c-7 /dev/i2c-7 open failed, gFileDesc[7] = -1 g_drm_device_id[0] = 26 g_drm_device_id[0] = 26 [BOOT] finish PLAT_DRV_INI_Init() on app_main_fastTune. Time = 3907 start APP_MGR_Audio_Custom_AQ_InitTbl() on _initAQTable. **[_MGR_Audio_custom_AQ_ParseAQTblHeader],,the AQ table path is:[./com.nvt.idtv/AQTbl/N22_P2K15_AQ.bin] [_MGR_Audio_custom_AQ_ParseAQTblData] [20150630test] ===> Parse AQTbl u32Idx = 2, AQIndexNum = 20 [_MGR_Audio_custom_AQ_ParseAQTblData]gstMgrCustomAQTblData.u32DSP_NUM=525 [_MGR_Audio_custom_AQ_ParseAQTblData]gstMgrCustomAQTblData.u32AMP_REG_NUM=45 [_MGR_Audio_custom_AQ_ParseAQTblData]gstMgrCustomAQTblData.u32AMP_RAM_NUM=121 [lwhite]===>APP_MGR_Audio_Custom_AQ_InitTbl Set Vender_Audio_Ctrl!! [APP_MGR_Audio_Custom_AQ_InitTbl]: [20150630test] ===>u32AQindex = 2, AQIndexNum = 20, bRet=1 [DEV_AMP_Install_CallbackFunc]START: end APP_MGR_Audio_Custom_AQ_InitTbl() OK on _initAQTable. [Boot] start DEV_COMMON_SET_PCBLAYOUTTYPE() on DEV_INI_Init Time = 3909 DEV_COMMON_SET_PCBLAYOUTTYPE 13 [DEV_COMMON_SET_PCBLAYOUTTYPE] ========== [DEV_COMMON_SET_PCBLAYOUTTYPE] ========== First Init ===> Yes[13] [Dev] start DEV_GPIO_Init() on DEV_INI_Init Time = 3910 [DEV] start DEV_GPIO_Init() on DEV_GPIO_Init Time = 3910 [DEV] start TD_OS_IPCShmCreate() on DEV_GPIO_Init 1 Time = 3910 [DEV] start _initGpioStatus() on DEV_GPIO_Init Time = 3911 [DEV] start _DEV_GPIO_InitOpenGPIO() on DEV_GPIO_Init Time = 3911 [DEV] start _DEV_GPIO_InitPWM() on DEV_GPIO_Init Time = 3911 _DEV_GPIO_InitPWM, pPWMSemaphoreMP is waiting!! Can not open /dev/nvt/ntkled , try path /dev/ntkled Can not open /dev/ntkled , try path /tmp/ntkled Open /tmp/ntkled successfully [DEV] start PLAT_OS_GetTimeMS() on DEV_GPIO_Init Time = 3916 [DEV] end PLAT_OS_GetTimeMS() on DEV_GPIO_Init Time = 3916 [DEV] start DEV_IIC_Init() on DEV_INI_Init Time = 3916 [Dev] start DEV_NIM_Init() on DEV_INI_Init Time = 3916 Device NIM ATV create complete Device NIM DTV create complete [Dev] start dev_src_init() on DEV_INI_Init Time = 3916 [Dev] start DEV_PANEL_Init() on DEV_INI_Init Time = 3917 Fail to get the PIN name LED_R --Get EN_DEV_GPIO_FUNCTION_LED_R Fail!!! Get PWM ChIdx: stDevMixedPwmInfo.enChIdx = 0 [Dev] start DEV_NIM_DTV_Init() on DEV_INI_Init Time = 3917 #DEV-AMP# 0. Bus: 2 #DEV-AMP# 0. Slave Addr: 0x0060 #DEV-AMP# #DEV-AMP# AMP Device Count: 1 [lwhite]===>DEV_AMP_FACT_Create cType=AMP_AD87588 #DEV-AMP# 0. reset pin: 133 Fail to get the PIN name AMP_MUTE [DEV_AMP_LoadInitData]START: [APP_MGR_Audio_Custom_AQ_LoadAMPInitData]START: u8Mode=0. [APP_MGR_Audio_Custom_AQ_LoadAMPInitData] *u32Length=45. [APP_MGR_Audio_Custom_AQ_LoadAMPInitData]END: bRet=1 [DEV_AMP_LoadInitData] (register) u32Length=45 [APP_MGR_Audio_Custom_AQ_LoadAMPInitData]START: u8Mode=1. [APP_MGR_Audio_Custom_AQ_LoadAMPInitData] *u32Length=121. [APP_MGR_Audio_Custom_AQ_LoadAMPInitData]END: bRet=1 [DEV_AMP_LoadInitData] (coefficient) u32Length=121 [DEV_AMP_LoadInitData]END: (bRet=1) #DEV-AMP# +AMP_AD87588_Init() [licl]======== c8ModelName = 32PFS4131/12=========== [DEV_COMMON_GetModelType] s_enModelType=3. (NIM_DTV)@@@@@@ DEV_NIM_DTV_Init: enModelType=3, gu32NimActiveModule=0x3 [BOOT] finish DEV_INI_Init() on app_main_fastTune. Time = 4253 mobo dbg... [Boot] PLAT_VOUT_EnableDisplayWindow(1) Fail to get the PIN name HDMI_HOTPLUG_3 #DEV-SRC#Not found HDMI2 HotPlug Definition Fail to get the PIN name HDMI_HOTPLUG_4 #DEV-SRC#Not found HDMI3 HotPlug Definition Fail to get the PIN name HDMI_HOTPLUG_5 #DEV-SRC#Not found HDMI4 HotPlug Definition NDAL_Tuner_Init: start NDAL_Tuner_Init: start to open DVIF dvif-fd[39] SAL_DEMOD_TUN_GetInitTunerType EN_TUNER_SI2151 C_SalTunerSI2151 Start ~~~ @@@@@@ C_SalTunerSI2151::Init #DEV-AMP# _AD87588_IOInit(), get GPIO description status: #DEV-AMP# - reset(OK) #DEV-AMP# - power down(OK) #DEV-AMP# - headphone enable(OK) #DEV-AMP# - mute(Fail) #DEV-AMP# [AMP_AD87588_ReStart] (4271) enter #DEV-AMP# +_AD87588_SetIO() pin(3) Level(0) #DEV-AMP# [_AD87588_PowerOnSequence] (4271) Set AMP_PD(107), level(0) #DEV-AMP# +_AD87588_SetIO() pin(0) Level(0) #DEV-AMP# [_AD87588_PowerOnSequence] (4273) Set AMP_RST(133), level(0) Si2151_PowerUpWithPatch: Get romid is 0x61 #DEV-AMP# +_AD87588_SetIO() pin(0) Level(1) #DEV-AMP# [_AD87588_PowerOnSequence] (4293) Set AMP_RST(133), level(1) libv4lcontrol: error getting username using uid instead: No such file or directory gfd =38 g_drm_device_id[0] = 26 Get Drm plane ID[0x26] ---[1095:1095][DRM_OSD_DRV]NEED TODO:Set_PlaneOrder(464): g_drm_device_id[0] = 26 ---[1095:1095] CreateWindow(2814):window ID[0] Creat new front surface ---[1095:1095] CreateWindow(2827):fastlogo info:Flip(0) LVDS(0)Panel(T:0,F:1 WH=1920X1080) Resolution(1920X1080)Dual_Out(0) ---[1095:1095] CreateWindow(2882):window ID[0] Creat new Back surface ---[1095:1095] CreateWindow(2921):window ID[0] Creat new 3D surface ---[1095:1095][SD_SHELL_GFX_OSD]ERR:CreateWindow(2939):Error window(1X1) alloc memory fail!!!!! ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=1 ---[1095:1095][DRM_OSD_DRV]ERROR:Set_BufPhyAddrSize(666):can't rm FB_id=[0] g_drm_device_id[0] = 26 Get Drm plane ID[0x25] ---[1095:1095][DRM_OSD_DRV]NEED TODO:Set_PlaneOrder(464): ---[1095:1095] CreateWindow(2814):window ID[1] Creat new front surface ---[1095:1095] CreateWindow(2827):fastlogo info:Flip(0) LVDS(0)Panel(T:0,F:1 WH=1920X1080) Resolution(1920X1080)Dual_Out(0) ---[1095:1095] CreateWindow(2882):window ID[1] Creat new Back surface ---[1095:1095] CreateWindow(2921):window ID[1] Creat new 3D surface ---[1095:1095][SD_SHELL_GFX_OSD]ERR:CreateWindow(2939):Error window(1X1) alloc memory fail!!!!! ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Set_BufPhyAddrSize(666):can't rm FB_id=[0] Init: EN_TUNER_SI2151 is initialized successfully C_SalTunerAV2018 Start ~~~ NDAL_dvif_open: _dvif_fd[39] setDVIFTunerType DVIF ==> KER_DVIF_IO_PLAT_SET_SALTunerType = PASS, status[0], fd: [39] (NIM_DTV) ==>DEV_NIM_DTV_Init() NDAL demod (NIM_DTV) ==>DEV_NIM_DTV_Open() NDAL demod Read iic FAIL pau8Buf[0]:00 g_drm_device_id[0] = 26 Get Drm plane ID[0x22] ---[1095:1095][DRM_OSD_DRV]NEED TODO:Set_PlaneOrder(464): ---[1095:1095] CreateWindow(2814):window ID[2] Creat new front surface ---[1095:1095] CreateWindow(2827):fastlogo info:Flip(0) LVDS(0)Panel(T:0,F:1 WH=1920X1080) Resolution(1920X1080)Dual_Out(0) ---[1095:1095] CreateWindow(2882):window ID[2] Creat new Back surface ---[1095:1095] CreateWindow(2921):window ID[2] Creat new 3D surface ---[1095:1095][SD_SHELL_GFX_OSD]ERR:CreateWindow(2939):Error window(1X1) alloc memory fail!!!!! ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Set_BufPhyAddrSize(666):can't rm FB_id=[0] g_drm_device_id[0] = 26 Get Drm plane ID[0x27] ---[1095:1095][DRM_OSD_DRV]NEED TODO:Set_PlaneOrder(464): ---[1095:1095] CreateWindow(2814):window ID[3] Creat new front surface ---[1095:1095] CreateWindow(2827):fastlogo info:Flip(0) LVDS(0)Panel(T:0,F:1 WH=1920X1080) Resolution(1920X1080)Dual_Out(0) ---[1095:1095] CreateWindow(2882):window ID[3] Creat new Back surface ---[1095:1095] CreateWindow(2921):window ID[3] Creat new 3D surface ---[1095:1095][SD_SHELL_GFX_OSD]ERR:CreateWindow(2939):Error window(1X1) alloc memory fail!!!!! ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Set_BufPhyAddrSize(666):can't rm FB_id=[0] [TD_SCHG_Base] VIU_LockTask_Enable,path=0,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [TD_SCHG_Base] VIU_LockTask_Enable,path=1,Enable=1 [lwhite]<===PLAT_AIN_Init[PLAT_TSPU_Initialize]start, u8TotalDemuxNo = 3 [PLAT_TSPU_Initialize]success, astDemuxHandle[0] = 0x12345600 End toggle PIN=241, Active level=0 #DEV-AMP# +_AD87588_SetIO() pin(3) Level(1) [PLAT_TSPU_Initialize]success, astDemuxHandle[1] = 0x12345601 Create AV Task Success Create AV Task Success [MSG_DRV_PQ][Lib_PQ] lib_PQ_init():Lib PQ Version : LIB-PQ-0.0.013-2016/01/18-xxx [MSG_DRV_PQ][Lib_PQ] lib_PQ_init():Lib PQ Header Version : LIB-PQ-0.0.007-HEADER NDAL_UserData_Init ok NDAL_UserData_InstallCallback ok #DEV-SRC#Toogle HDMI0 HotPlug Successfully End toggle PIN=248, Active level=0 #DEV-AMP# [_AD87588_PowerOnSequence] (4750) Set AMP_PD(107), level(1) #DEV-SRC#Toogle HDMI1 HotPlug Successfully NDAL_UserData_Start ok PLAT_VBI_Init Success NdGfx Param need 160 size NdGfx Param need 160 size NdGfx Param need 160 size #DEV-AMP# +_AD87588_SetIO() pin(2) Level(1) #DEV-AMP# [_AD87588_PowerOnSequence] (4781) Set AMP_HP_EN(108), level(1) ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=1 ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=1 #DEV-AMP# [_AD87588_PowerOnSequence] (4981) IIC Start #DEV-AMP# [_AD87588_SWInit] (4981) enter ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 [BOOT] finish PLAT_INI_Init() on app_main_fastTune. Time = 5065 [lwhite]===>app_main_fastTune Audio Load DB Time = 5066 [Boot] xxxxxxxxxxxxxx G_enLastSourceIndex : 4 [TD_SCHG_Base] VIU_LockTask_Enable,path=0,Enable=1 VIDIOC_S_STD: Bad file descriptor VIDIOC_S_STD: Bad file descriptor libv4lcontrol: error getting username using uid instead: No such file or directory _sdExtIn_select_input: 205 Select input:V4L2_INPUT_SCART libv4lcontrol: error getting username using uid instead: No such file or directory gfd =47 [TD_SCHG_Base] PLAT_VIU_ChangeInput( u8Path=0, SourceID=0x1501) [Time=5130] [TD_SCHG_Base] VIU_LockTask_Enable,path=0,Enable=0 [lwhite]===>APP_MGR_Audio_FastBoot_PreInit #P-AOUT# PLAT_AOUT_SetPostParams() - same parameters -> skip [lwhite]<===APP_MGR_Audio_FastBoot_PreInit [VIDSCHG]: Scart_Fasttune, 2631 start WSS [BOOT] DFB_initialise before time = 5163 commandline read: com.nvt.idtv (*) [(null) 5.181,759] ( 1095: 1095) DirectFB/Main: Initialization Start (*) [Main Thread 5.184,999] ( 1095: 1095) Direct/Thread: Started 'SigHandler' (1348) [CRITICAL - OTHER/0] <8388608>... ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.7.1 |~~~~~~~~~~~~~~~~~~~~~~~~~~ (c) 2012-2013 DirectFB integrated media GmbH (c) 2001-2013 The world wide DirectFB Open Source Community (c) 2000-2004 Convergence (integrated media) GmbH ---------------------------------------------------------------- (*) [Main Thread 5.185,205] ( 1095: 1095) DirectFB/Core: Single Application Core. (2016-05-18 05:45) (*) [Main Thread 5.185,352] ( 1095: 1095) DirectFB/Build: SVN Revision 250038 (*) [Main Thread 5.186,067] ( 1095: 1095) Direct/Thread: Started 'Fusion Dispatch' (1349) [MESSAGING - OTHER/0] <8388608>... (*) [Main Thread 5.186,614] ( 1095: 1095) NVT Remote driver_open_device In (user mode)! (*) [Main Thread 5.187,054] ( 1095: 1095) Direct/Thread: Started 'Nvt Remote Input' (1350) [INPUT - OTHER/0] <8388608>... IR fifo ready (*) [Main Thread 5.187,558] ( 1095: 1095) Direct/Thread: Started 'Nvt KP Input' (1351) [INPUT - OTHER/0] <8388608>... nvt_KeyPadEventThread 244 (*) [Main Thread 5.189,330] ( 1095: 1095) Direct/Thread: Started 'Nvt pipe input' (1352) [INPUT - OTHER/0] <8388608>... (*) [Main Thread 5.189,456] ( 1095: 1095) DirectFB/Input: Novatek Remote Control 0.9 (Novatek) (*) [Main Thread 5.191,379] ( 1095: 1095) Direct/Thread: Started 'Hotplug with Linux Input' (1353) [INPUT - OTHER/0] <8388608>... (*) [Main Thread 5.191,503] ( 1095: 1095) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver (*) [Main Thread 5.204,511] ( 1095: 1095) DirectFB/Genefx: NEON detected, but disabled by option 'no-neon' [NDAL_Common_Init]FUNCTION_START g_bSdcommonInit = 1 ############################################## ############################################## ################ NDAL_Common_Init: 232 Do Nothing3 ############### ############################################## ############################################## g_drm_device_id[0] = 26 NdGfx Param need 160 size g_drm_device_id[0] = 26 Get Drm plane ID[0x28] ---[1095:1095][DRM_OSD_DRV]NEED TODO:Set_PlaneOrder(464): ---[1095:1095] CreateWindow(2814):window ID[4] Creat new front surface ---[1095:1095] CreateWindow(2827):fastlogo info:Flip(0) LVDS(0)Panel(T:0,F:1 WH=1920X1080) Resolution(1920X1080)Dual_Out(0) ---[1095:1095] CreateWindow(2882):window ID[4] Creat new Back surface ---[1095:1095] CreateWindow(2921):window ID[4] Creat new 3D surface ---[1095:1095][SD_SHELL_GFX_OSD]ERR:CreateWindow(2939):Error window(1X1) alloc memory fail!!!!! ---[1095:1095][DRM_OSD_DRV]ERROR:Plane_Enable(426):Handle=26,Enable=0 ---[1095:1095][DRM_OSD_DRV]ERROR:Set_BufPhyAddrSize(666):can't rm FB_id=[0] NdGfx Param need 160 size (*) [Main Thread 5.214,460] ( 1095: 1095) Palette Buffer Phys = 0x0648A000 Addr = 0xB5C02000 (*) [Main Thread 5.214,979] ( 1095: 1095) A8 Palette Buffer Phys = 0x0648B000 Addr = 0xB5C01000 (*) [Main Thread 5.215,952] ( 1095: 1095) LAYER 0 -> PLANE 0 Buffer Phys = 0x05340000 Size = 0x00708000 Addr = 0xB027A000 (*) [Main Thread 5.217,663] ( 1095: 1095) LAYER 1 -> PLANE 1 Buffer Phys = 0x05A48000 Size = 0x00708000 Addr = 0xAF46A000 (*) [Main Thread 5.218,150] ( 1095: 1095) LAYER 2 -> PLANE 2 Buffer Phys = 0x06150000 Size = 0x0032A000 Addr = 0xAEA38000 [GPU_SYS][DBG][1095] GPU_SYS_Linux_Open(/tmp/ntkgpu, 2) = 55 [GPU_CTRL][DBG]Hw Version = 1 (*) [Main Thread 5.219,060] ( 1095: 1095) DirectFB/Graphics: Novatek NVTGA GPU 1.0 (Novatek) (*) [Main Thread 5.219,288] ( 1095: 1095) DirectFB/Core/WM: Default 0.3 (directfb.org) (*) [Main Thread 5.219,535] ( 1095: 1095) NVTGA/Screen: Screen Resolution: 1920x1080 (*) [Main Thread 5.220,843] ( 1095: 1095) WM/Default: init_nvt_hw_cursor -> Cursor Device Node: /dev/fb3 -> Start Address: 0x0647A000 -> Buffer Length: 0x00008000 -> Cursor Dimension: 64x64 -> Screen Dimension: 1920x1080 -> Panel V-Flip: Disabled (*) [Main Thread 5.221,962] ( 1095: 1095) Direct/Thread[ 5.574974] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 : Started 'Genefx' (1354) [DEFAULT - OTHER/0] <8388608>... (*) [Main Thread 5.223,238] ( 1095: 1095) NVT[ 5.598057] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 GA/Screen: Screen Resolution: 1920x1080 (*) [Main Thread 5.261,849] ( 1095: 1095) Direct[ 5.620387] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 FB/Main: Initialization End #DEV-AMP# [_AD87588_SWInit_FailRetryWrapper] (5267)[ 5.641703] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 _AD87588_SWInit() init successful #DEV-AMP# +AMP_AD87588_CheckRebootStatus() bStatus(1) #DE[ 5.663816] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 V-AMP# [AMP_AD87588_ReStart] (5268) exit #DEV-AMP# -AMP_AD87588_Init() #DEV-AMP# 0. AMP_AD87588 [NPC] LIB_NPC_PQMGR_SERVER is running !!!! ########################### [NPC] LIB_NPC[ 5.693468] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 _PQMGR_SERVER is running !!!! ########################### fdidtv open fa[ 5.714738] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 il[BOOT] DFB_initialise after time = 5278 dev_name = /dev/mtd3 partition_offset = 0 [BOOT] Pa[ 5.735622] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 ngu_Start Time = 5287 [DEV_COMMON_GetModelType] s_enModelType=3. [DEV_COMMON_CheckModelSupport[ 5.757961] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 DVBS] bSupported=1 (LoadOneGzmFile): OneGzm file size=13193464 [ 5.779262] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.812392] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.833003] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.853854] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.873779] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.894634] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.923136] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.945850] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.968148] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 5.989147] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.011178] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.043654] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.064413] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.085317] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.106553] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.128164] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.155543] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.178889] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.201413] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.223630] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.245717] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.279030] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.299575] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.320236] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.341166] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.361968] NAND read : uncorrectable Block:499 Page:16 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.389915] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.411446] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.432261] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.456343] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.479238] NAND read : uncorrectable Block:499 Page:56 status:0x13080c7 status_again:0x13080c7 CN0:0x14 CN1:0x14 CN2:0x0 CN3:0x0 NfcStatus:0x14000001 [ 6.502436] UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 39:4096, read 126976 bytes [ 6.520414] UBIFS error (pid 1127): ubifs_check_node: bad CRC: calculated 0x106f80bc, read 0x32c4d709 [ 6.532145] UBIFS error (pid 1127): ubifs_check_node: bad node at LEB 34:28672 [ 6.542315] magic 0x6101831 [ 6.546774] crc 0x32c4d709 [ 6.550808] node_type 1 (data node) [ 6.555695] group_type 0 (no node group) [ 6.560434] sqnum 33114401 [ 6.564458] len 552 [ 6.567925] key (54132, data, 27) [ 6.572868] size 4096 [ 6.576093] compr_typ 1 [ 6.579336] data size 504 [ 6.582992] data: [ 6.585402] 00000000: 03 00 01 00 00 00 00 20 03 00 00 09 01 00 35 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.597422] 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.608759] 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.620143] 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.631401] 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.642671] 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.653871] 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.665024] 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.676345] 00000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.687976] 00000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.699617] 00000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.710901] 00000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.721935] 00000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.732963] 000001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.744269] 000001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.755459] 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.771593] UBIFS error (pid 1127): ubifs_scan: bad node [ 6.778748] UBIFS error (pid 1127): ubifs_scanned_corruption: corruption at LEB 34:28672 [ 6.790090] UBIFS error (pid 1127): ubifs_scanned_corruption: first 8192 bytes from LEB 34:28672 [ 6.835940] UBIFS error (pid 1127): ubifs_scan: LEB 34 scanning failed [ 6.850576] UBIFS error (pid 1127): make_reservation: cannot reserve 843 bytes in jhead 2, error -117 [ 6.863492] UBIFS error (pid 1127): do_writepage: cannot write page 0 of inode 74, error -117 GZM RELIABLE_CHECK: /shell/ShellOption GZM RELIABLE_CHECK: /shell/LocalEvent GZM RELIABLE_CHECK: /shell/ShellTimeshift [BOOT] Pangu wait idtv DFB Init before [BOOT] Pangu wait idtv DFB Init after PANGU_ENGINE###TommyXie: HWCompose = NO[NULL] version: 258796-Jun 30 2016,15:48:50 (*) [(null) 9.045,449] ( 1095: 1356) DirectFB/Main: Initialization Start o--(1095:1356): in o--(1095:1356): -> IDirectFB::GetDisplayLayer(osdLayer:0) o--(1095:1356): -> IDirectFBDisplayLayer::GetConfiguration o--(1095:1356): -> IDirectFBDisplayLayer::GetConfiguration(1280 * 720) o--(1095:1356): -> IDirectFBDisplayLayer::GetConfiguration() m_config.pixelformat:4295684 o--(1095:1356): -> IDirectFBDisplayLayer::CreateWindow (!!!) *** UNIMPLEMENTED [fusion_get_fusionee_pid] *** [fusion.c:3976] o--(1095:1356): -> IDirectFBWindow::GetSurface o--(1095:1356): -> IDirectFBWindow::CreateEventBuffer [PANGU]:GizmoWindow::Create [PANGU]:m_index=0 [PANGU]:m_width=1280 [PANGU]:m_height=720 [PANGU]:m_format=2 [BOOT] UI present time = 9335 [TD_SCHG_Base] Mode Change = Source Change -> No Signal [TD_SCHG_Base] Mode Change Occur, ModeChangeAction =1 [TD_SCHG_Base] [CCC][_exec_event_callback]viu callback event= 1, [Time=9503] [TD_SCHG_Base] [CCC] PLAT_VIU_EnableBlueScreen ,Path=0, EnableBlueScreen=1,[Time=9503] [BOOT] Wait for video ready Time = 4220 [Boot] _Post_initialise start Time = 9505 start MID_EVT_Init() on app_main_fastTune - 4285. Time = 9505 libv4lcontrol: error getting username using uid instead: No such file or directory [Dev] start DEV_USB_Init() on DEV_Post_Init Time = 9508 [TD_SCHG_Base] [CCC[ 9.573107] [MSG_DRV_CRYPTO]Open a CRYPTO device ] [plat_viu_send_videvt]viu send event= 2, [Time=9509] DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV-USB| _USB_check_Default_Device didn't exit ! status = 0xffffffff DEV_FP_Init, 979 DEV_FP_Init, 996 DEV_Uart_parser_KeyMapFile() load: /mtd_apexe/board/data/nvt.key.tk.ini start PLAT_STBC_Data_Init start time=9515 PLAT_STBC_Data_Init stbcdat partition name=/dev/mtd19 BlockCount = 3, PageCount = 64, BlockSize = 131072, PageSize = 2048 PLAT_STBC_Data_Init: Set PowerOn status as ON PLAT_STBC_Data_Init Success start PLAT_STBC_Data_Init end time=9556 mmap ret=0xac9bb000, size=262144 NDAL_CP_Init pu32VitrAddr = 0xac9bb000 PLAT_DECSA_Initialize Success Already NDAL_CP_Init PLAT_CRYPTO_Init Success!! PLAT_CRYPTO_Init Success PLAT_TVOUT_Init Success IR fifo ready start _initAudio() APP_MGR_Audio_Init start [APP_MGR_Audio_Init]<====== EN_PLAT_SIF_SOUND_SYS_2 enLocalSet = 2 [APP_MGR_Audio_Custom_AQ_GetAQTblDSP] [20150729test] ===> Get AQ DSP Table Data OK! [PLAT_AIN] Process /proc/1095 exist... Do nothing! [LIM.YAO]===> same config, skip it [LIM.YAO]===> same config, skip it [LIM.YAO]===> same config, skip it [LIM.YAO]===> same config, skip it [_MGR_Audio_SetPostParamsValue]APP_AUD_POST_MODULE_DRC: b8Enable=1, s32Climax1=7fffff, s32Climax2=7fffff, s32Threshold1=7fffff, s32Threshold2=7fffff [APP_MGR_Audio_Custom_AQ_GetAQTblDSP] [20150729test] ===> Get AQ DSP Table Data OK! #P-AOUT# PLAT_AOUT_SetSpeakerVolume() - output unit not found ( OUT-32767 ) [ERR_MID_DDC_DEC][mid_ddc_StopAudioDesDecoding(): 2338] Error (0) >= 0 [PLAT_AOUT_SetSpeakerDataType]<======[20150729test] enSpkID = 0 , enDataType = 0 [PLAT_AOUT_SetSpeakerDataType]<======[20150729test] VenderAudio_PPRunsOn(0) [PLAT_AOUT_SetSpeakerDataType]<======[20150729test] enSpkID = 1 , enDataType = 2 [VenderAudio_ADVolume] ADVolume =83 [PLAT_AOUT_SetSpeakerDataType]<======[20150729test] enSpkID = 3 , enDataType = 4 @@@@@@====>EQ value-(0),(0),(0),(0),(0) #DEV-AMP# +AMP_AD87588_SoftMute() enMute(0) [_initAudio]: Unmute AMP after AMP Restart OK! end _initAudio() start _Post_initialise xxxxxxxxxxxxxxxxxxxx on _Post_initialise. Fail to get the PIN name LED_G Fail to get the PIN name LED_R start MID_INI_Init() on _Post_initialise. start MID_SFLT_Initialize() on MID_INI_Init. start MID_PES_Initialize() on MID_INI_Init. start MID_DSUB_Initialize() on MID_INI_Init. start MID_DSUB_Set_32bTmpSurface(1) on MID_INI_Init. [MID_DSUB] set u8DFBSurfaceMode to 1 start MID_DDC_Initialize() on MID_INI_Init. [PLAT_TSPU_SetDemuxSource]start, u8DemuxNo 0, enSource 1 MID_TKGS_Init start MID_SUP_Init() on MID_INI_Init. start MID_CONTROL_Initialize() on MID_INI_Init. [PLAT_TSPU_SetDemuxSource]start, u8DemuxNo 0, enSource 1 [PLAT_TSPU_SetDemuxSource]start, u8DemuxNo 1, enSource 3 start MID_EVT_Init() on MID_INI_Init. [MID_EVT_Init(): 237][MID_EVT]initialize already! start MID_SYS_Initialize() on MID_INI_Init. start MID_DB_Initialize() on MID_INI_Init. _sifilter_monitor_task, pid=1095, tid=1368 xxxxxxxxx 1. PLAT_FS_FileOpen read fail -> File Path /mtd_apdat/FLASH_DTVINFO_TC xxxxxxxxx 3. File write fail -> File Path /mtd_apdat/FLASH_DTVINFO_TC EN_PLAT_FLH_HANDLE_ERROR xxxxxxxxx File Path /mtd_apdat/FLASH_DTVINFO_TC error no 30 error description Read-only file system Function db_SetDefaultDB Line[516]: PLAT_FLH_Open failed!! [ 10.576826] UBIFS error (pid 6): make_reservation: cannot reserve 245 bytes in jhead 2, error -30 [ 10.587403] UBIFS error (pid 6): do_writepage: cannot write page 1 of inode 74, error -30 [ 10.598128] UBIFS error (pid 6): make_reservation: cannot reserve 160 bytes in jhead 1, error -30 [ 10.609431] UBIFS error (pid 6): ubifs_write_inode: can't write inode 74, error -30 [ 11.877862] UBIFS error (pid 1127): make_reservation: cannot reserve 160 bytes in jhead 1, error -30 [ 11.889267] UBIFS error (pid 1127): ubifs_write_inode: can't write inode 54893, error -30